|
View previous topic :: View next topic
|
| Author |
Message |
le_
Joined: 07 Aug 2008
Posts: 1
|
 Posted: Thu Aug 07, 2008 2:18 am Post subject: LEED NCv2.2 EAc1 baseline building |
    |
|
The ASHRAE standard 90.1-2004 gives indications on the assembly U-values for roofs, above and below grade walls, floors and doors. But what about U-values for internal partitions (both vertical and horizontal) and for slab-on-grade floors?
Is there any specific indication for these assemblies or should I just use the proposed building U-values?
Thank you |
|
| Back to top |
|
 |
joelmckellar
Joined: 31 May 2006
Posts: 91
Location: Charleston, SC
|
| Posted: Tue Aug 12, 2008 11:02 am Post subject: |
|
|
Interior partitions shouldn't have any need for insulation, as there's no need to insulate one conditioned space from the other. I'm not sure what requirements there are for slab on grade flooring, so you'll need to talk to an engineer for help with that. Good luck!
Joel
_________________
Joel McKellar, LEED AP
Real Life LEED - A blog devoted to practicing LEED professionals |
|
| Back to top |
|
|
|
blogger
del.icio.us
digg
slashdot
